Table of Contents
Advertisement
Front Panel Operation
This section of the manual discusses the operation of the SME 211 front panel.
Topics covered include:
•
•
•
Front Panel Features
ALARM
A
B
Figure 6.
Power LED
A
Alarm LED
B
USB mini-B port for configuration
C
USB type A port for external storage
D
HDCP LED
E
A
B
C
Front Panel Features
SME 211 Power Up Procedure
Front Panel Lockout (Executive Mode)
E
INPUT
HDCP
CLIP
USB
HDMI
AUDIO
CONFIG
C
D
F
SME 211 Front Panel
Power LED —
Green — The power is on and the unit is operational.
•
Blinking Green – The power is on but the unit is still booting (not operational).
•
Alarm LED — Lights up red when one or more alarms are triggered (see
Traps
on page 45 for more information on the types of alarms and how to clear
them).
USB mini-B port for configuration — Connect a control device to this port with a
USB mini-B cable (not supplied). Use this port to send SIS commands to the SME 211
for device configuration and control (see
starting on page 58).
Configuration and adjustments can be performed using the embedded web pages (see
Web-Based User Interface
Communication and Control
G
OUT
HDMI LINE HDMI
HDMI LED
F
Audio Input indicators
G
Audio Output indicators
G
Streaming controls with LED
H
indicators
Remote Communication and Control
on page 16), and the SIS commands (see
starting on page 58).
H
MASK
SME 211
STREAMING MEDIA PROCESSOR
Alarms and
Remote
SME 211 • Introduction
13
Advertisement
Table of Contents
