Table of Contents
Advertisement
Audio Configuration
Figure 19.
Audio Configuration Panel
Use the gain controls in this section to configure the analog and digital audio inputs.
HDMI Output Configuration
Figure 20.
HDMI Output Configuration Panel
The Resolution of the HDMI output can be viewed in this panel. It is configured in the
1
Encoder Settings and Streaming
NOTE: Custom resolutions are centered within the next largest standard resolution
and padded with a black border on the HDMI output.
The Refresh Rate for the output of the SME can be selected from the drop-down list.
2
Choose 50 Hz or 60 Hz.
The Status OSD will be displayed on the top left corner of the HDMI preview output. By
3
default, Enable Status OSD on HDMI output is enabled. Deselect the checkbox to
disable.
NOTE: The settings for the HDMI Text Overlay can be controlled only via SIS
commands (see
HDMI Text Overlay Anchor
The HDMI mute output options can be selected in this panel. Choose one of the two
4
options: Video Mute or Sync Mute.
Choose the desired color to display when HDCP content is present.
5
page (see page 32).
on page 75).
SME 211 • Web-Based User Interface
29
Advertisement
Table of Contents
