Table of Contents
Advertisement
Browsers
In order to view the SME 211 embedded web pages, use one of the supported Web
browsers (and versions) listed below.
DataViewer
DataViewer is an enhanced terminal emulation program that facilitates analysis of RS-232,
USB, and TCP/IP communication with Extron devices. The software allows users to send
commands to a device and view the responses in ASCII or hexadecimal format. Command
and response logs can be saved in text or HTML format.
DataViewer is available at www.extron.com. Download the installation file and load the
program on the PC connected to the SME 211.
NOTE: For a new installation, the Extron USB driver must also be installed.
Start the DataViewer program
1.
2.
Google Chrome version 48 or higher
•
Mozilla Firefox version 44 or higher
•
Microsoft Internet Explorer (for Windows operating systems)
•
Apple Safari version 9 or higher (for macOS operating systems)
•
NOTE: Safari is the preferred browser for macOS operating systems.
NOTE: The preview video in the AV Controls panel of the SME 211 uses an HTML5
player and may not be supported by some older browser versions. Browser
compatibility can be confirmed here:
To see a preview of the current stream you can either:
•
Use a different browser
or
•
Open a standalone, third-party video player (such as VideoLAN opensource
VLC media player) and connect to the SME stream.
Additionally, the device web UI is compliant, but not fully featured, with the internal
•
browser client:
QTWeb v4.x
•
The driver is included with the DataViewer installer.
Click the desktop icon.
The Communication Setup dialog box opens. Select a Communication tab (see
figure 43
on the next page).
a.
Select the Comm Port (RS-232) tab (shown with the correct protocol settings
below) if using the rear panel RS-232 port (
b.
Select the TCP/IP tab if using a network connection (
c.
Select the USB tab if using the front panel config port (
http://html5test.com/
).
1
).
2
).
3
SME 211 • Reference Information
88
Advertisement
Table of Contents
