Table of Contents
Advertisement
EDID
The EDID page within the Configuration tab makes it possible to manage the EDID
information (resolution and refresh rate) between the HDMI input and the output source. The
SME uses EDID Minder, which ensures that a source device connected to the SME 211
input continuously sees the EDID of a sink device.
This page allows the user to select from 38 factory-loaded EDID or create up to three
custom EDID (see
The default EDID for the SME 211 is 720p @ 60 Hz.
To open this page, click the Configuration tab at the top of the SME 211 embedded
web pages and then click the EDID tab on the second tier of tabs.
The EDID Minder page opens.
Figure 21.
To select an EDID:
1.
Open the EDID Minder page.
2.
Select the resolution and refresh rate from the EDID Selection panel, or use the
Search field to find the desired EDID (
3.
Click the Source radio button (
4.
Click the Assign button (
5.
To save the selected EDID to a PC, click the download icon (
NOTE: See the SME 211 Embedded Web Pages Help File for additional information.
EDID Values
on page 85 for a complete list of available EDID).
EDID Minder Page
) in the INPUT panel.
2
) in the INPUT panel.
3
).
1
) in the INPUT panel.
4
SME 211 • Web-Based User Interface
30
Advertisement
Table of Contents
