Table of Contents
Advertisement
Auto Memory and Auto-Image
Select the checkbox to enable Auto-Image (see figure 18,
by executing image sizing, centering, and filtering adjustments with a single button push.
Select the checkbox to enable Auto Memory (
settings for signals that have previously been applied. When Auto Memory is disabled, the
SME 211 treats every new input as a new source.
Figure 18.
Video Configuration Auto-Image and Auto Memory
These two features can work together depending on the configuration the user chooses.
See the table below for more information on the settings.
Auto Memory and Auto-Image Features
Auto Memory Auto-Image Information
On
On
On
Off
Off
On
Off
Off
HDCP Authorization
Select this checkbox to turn the HDCP Authorized on or off (
the SME 211 requests that the source does not use encryption if possible. If the source
enforces encryption, the SME 211 is unable to display the HDCP content, and displays a
green or black screen.
1
). Auto Memory recalls input and image
2
1
"New" signals or rates not previously detected by the
device are initially set up using default parameters. Then,
Auto-Image is automatically applied and those values
are stored. The next time that signal is detected, the
stored values in the auto memory location are applied.
"New" signals or rates not previously detected by the
device are set up using default parameters. If changes
are made manually to the input and picture settings, an
Auto Memory location is created and then recalled each
successive instance that the input is detected.
When Auto Memory is disabled, each change in the
input sync is treated as a new signal, and Auto-Image
is triggered automatically. Any changes that are made
manually to the image and picture controls are lost each
time a new refresh rate is detected.
Each change in the input sync causes default values
to be applied to the rate. Any changes that are made
manually to the image and picture controls are lost when
a new rate is applied.
SME 211 • Web-Based User Interface
). Auto-Image simplifies setup
2
3
). When disabled (Off)
3
28
Advertisement
Table of Contents
