Drive-Cliq Topology At The High Frequency Drive - Siemens SINAMICS S120 System Manual

Configuring
11.2 Preconditions for commissioning
11.2.3

DRIVE-CLiQ topology at the High Frequency Drive

The diagrams show how the DRIVE-CLiQ cables between HF Motor Module, HF Choke Module
and HF Damping Module must be connected to ensure an error-free function.
NOTICE
Damage when using incorrect DRIVE-CLiQ cables
Damage or malfunctions can occur on the devices or system when DRIVE-CLiQ cables are used
that are either incorrect or have not been approved for this purpose.
• Only use suitable DRIVE-CLiQ cables that have been approved by Siemens for the particular
High Frequency Drive with 16 kHz
Figure 11-1
162
application.
DRIVE-CLiQ topology at the High Frequency Drive (16 kHz)
High Frequency Drive
System Manual, 10/2020, 6SL3097-5AH10-0BP0