Configuration | Spreading
Use this page to allow configuration of the DSSS applications.
Description
Spreading Calculator
View/Load/Store
Configuration
Modem Configuration
Figure 6-15. Configuration | Spreading Page
The calculator is used to determine the Chip Rate and Occupied bandwidth when
DSSS spreading is used. It can be used to calculate or configure the Tx or Rx of the
modem. Spreading is used in LDPC mode, BPSK.
This is used to confirm that there is a stored modem configuration in one of the ten
slots and to load and store a configuration. To view, Change the Configure Number
and select view to see if the slot is either empty or when it was stored.
6–22
SLM-5650C / SLM-5650C-ODU Satellite Modem
Parameters
Revision 1
MN-SLM-5650C