Optional Message Arguments; End Of Packet - Comtech EF Data SLM-5650C CyberLynx Installation And Operation Manual

Symbol
^
(ASCI code 94)
7.4.6

Optional Message Arguments

Arguments are not required for all messages. Arguments are ASCII codes for the characters 0 to 9 (ASCII codes 48 to 57), period (ASCII
code 46) and comma (ASCII code 44).
7.4.7

End Of Packet

•
Controller-to-Target: This is the 'Carriage Return' character (ASCII code 13).
•
Target-to-Controller: This is the two-character sequence 'Carriage Return', 'Line Feed' (ASCII codes 13 and 10). Both indicate the
valid termination of a packet.
Serial Remote Control
EXAMPLE: 0001/RET~ (indicating that it had finished waiting for a response and was now ready for further comms).
If the Controller sends a correctly formatted command BUT the modem is in Ethernet Remote mode, it will not allow reconfiguration,
and will respond with TFQ^.
SLM-5650C / SLM-5650C-ODU Satellite Modem
Definition
7–6
Revision 1
MN-SLM-5650C