Comtech EF Data SLM-5650C CyberLynx Installation And Operation Manual page 114

Table of Contents

Advertisement

Command
Arguments for
Parameter
(Instruction
Command or
Type
Code and
Response to
Qualifier)
Query
Rx
RDD=
1 byte
Differential
Decoding
Rx Data
RDF=
1 byte
Fault
Rx Data
RDI=
1 byte
Invert
Rx
RDS=
1 byte
Descrambler
Rx
N/A
5 bytes
Frequency
Offset
Rx
RFQ=
8 bytes
Frequency
Serial Remote Control
Description of Arguments
Command or Query.
Rx Differential Decoding in the form x, where:
0=Off
1=On
Depending on FEC type or Modulation Type, not all selections will be valid.
Example: RDD=1 (selects Rx Differential Decoding On)
Command or Query.
Receive Data Fault, where:
0=None
1=DATA
2=AIS
Example: RDF=0 (selects Data Fault = None)
Command or Query.
Invert Receive Data, where:
0=Normal
1=Inverted
Example: RDI=1 (selects Inverted RX Data)
Command or Query.
Rx Scrambler state, where:
0 = Off
1 = OM-73 Scrambler
2 = IESS-V.35 Scrambler
3 = Modified V.35 (Comtech EF Data Closed Network)
4 = Reed-Solomon Synchronous Scrambler
5 = IBS Overhead Synchronous Scrambler
6 = TURBO Scrambler
Depending on Modem mode, FEC type, overhead type, and RS state, not all selections
will be valid.
Example: RDS=1 (OM-73 Scrambler On)
Query only.
Unit returns the value of the measured frequency offset of the carrier being demodulated.
Values range from ± 0 to ± 30 kHz, 100 Hz resolution.
Returns 99999 if the demodulator is unlocked.
Example: RFO=+02.3 (selects + 2.3 kHz)
Command or Query.
Rx Frequency, 52 to 88 MHz, 104 to 176 MHz, and 950 to 2000 MHz.
Resolution = 1000Hz.
Example: RFQ=0140.987
SLM-5650C / SLM-5650C-ODU Satellite Modem
7–20
Revision 1
Query
Response to
(Instruction
Response to
Command
Code and
Query
Qualifier)
RDD=
RDD?
RDD=x
RDD?
(see Description of
RDD*
Arguments)
RDD#
RDF =
RDF?
RDF=x
RDF?
(see Description of
RDF*
Arguments)
RDF#
RDI =
RDI?
RDI=x
RDI?
(see Description of
RDI*
Arguments)
RDI#
RDS=
RDS?
RDS=x
RDS?
(see Description of
RDS*
Arguments)
RDS#
N/A
RFO?
RFO=xxxxx
(see Description of
Arguments)
RFQ=
RFQ?
RFQ=xxxx.xxx
RFQ?
(see Description of
RFQ*
Arguments)
RFQ#
MN-SLM-5650C

Advertisement

Table of Contents
loading

Table of Contents