Comtech EF Data SLM-5650C CyberLynx Installation And Operation Manual page 123

Command Arguments for
Parameter (Instruction Command or
Type Code and Response to
Qualifier) Query
Retrieve next N/A 110 bytes
5 unread
Stored
Events
Retrieve next N/A 105 bytes
5 unread
Stored
Statistics
Serial N/A 9 bytes
Number
Serial Remote Control
Description of Arguments
Query only.
Unit returns the oldest 5 Stored Events which have not yet been read
over the remote control.
Reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}Sub-body, where Sub-body= Axxxxxxxxddmmyyhhmmss, A
being the fault type where:
1=Unit
2=Rx Traffic
3=Tx Traffic
4=Info
xxxxxxxx is the Fault Code number, as in LUF?, TXF?, RXF?, or Info
Code, which is:
00000000=Power Off
00000001=Power On
00000002=Log Cleared
00000004=Global Config Change
00000007=Transec Boot Timeout
If there are less than 5 events to be retrieved, the remaining positions
are padded with zeros.
If there are no new events, the response is RNE*.
Query only.
Unit returns the oldest 5 Stored Statistics which have not yet been read
over the remote control.
Reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}Sub-body, where Sub-body= AA.ABB.Bddmmyyhhmmss,
AA.A = Minimum Eb/No during sample period. "Loss" is displayed if
carrier was lost during the sample period.
BB.B = Average Eb/No during sample period. "Loss" is displayed if
carrier was lost during the entire sample period.
If there are less than 5 events to be retrieved, the remaining positions
are padded with zeros.
If there are no new events, the response is RNS*.
Query only.
Used to query the unit 9-digit serial number. Unit returns its S/N in the
form xxxxxxxxx.
Example: SNO=176500143
SLM-5650C / SLM-5650C-ODU Satellite Modem
Response to
Command
N/A
N/A
N/A
7–29
Revision 1
Query
(Instruction
Response to Query
Code and
Qualifier)
RNE? RNE={CR}Axxxxxxxxddmmyyhhmmss
{CR}Axxxxxxxxddmmyyhhmmss
{CR}Axxxxxxxxddmmyyhhmmss
{CR}Axxxxxxxxddmmyyhhmmss
{CR}Axxxxxxxxddmmyyhhmmss
(see Description of Arguments)
RNS? RNS={CR}AA.ABB.Bddmmyyhhmmss
{CR}AA.ABB.Bddmmyyhhmmss
{CR}AA.ABB.Bddmmyyhhmmss
{CR}AA.ABB.Bddmmyyhhmmss
{CR}AA.ABB.Bddmmyyhhmmss
(see Description for Arguments)
SNO? SNO=xxxxxxxxx
(see Description of Arguments)
MN-SLM-5650C