Table of Contents
Advertisement
7.5.5
Modem, Unit Commands / Queries
Command
Arguments for
Parameter
(Instruction
Command or
Type
Code and
Response to
Qualifier)
Query
Clear All
CAE=
None
Stored
Events
Clear All
CAS=
None
Stored
Statistics
Configured
N/A
16 bytes
FAST
Options
Serial Remote Control
Description of Arguments
Command only.
Forces the software to clear the software events log.
Note: This command takes no arguments
Example: CAE=
Command only.
Forces the software to clear the software statistics log.
Note: This command takes no arguments
Example: CAS=
Query only.
Unit returns information concerning the Configured FAST Options, and
the option field, in the form abcdefghxxxxxxxx, where:
a = QOS:
0 = Not Installed
1 = Installed
b = Reserved
c = Spectrum Spreading
d = Management Security:
0 = Not Installed
1 = Installed
e = Vipersat Compatibility:
0 = Not Installed
1 = Installed
f = Reserved
g = Transec Data Rate Option:
0 = Base (5,000 kbps),
1 = 10,000 kbps
2 = 20,000 kbps
3 = 51,840 kbps
4 = 155,520 kbps
5 = 2,500 kbps
SLM-5650C / SLM-5650C-ODU Satellite Modem
Response to
Command
CAE=
CAE?
CAE*
CAE#
CAS=
CAS?
CAS*
CAS#
N/A
7–23
Revision 1
Query
(Instruction
Response to Query
Code and
Qualifier)
N/A
N/A
N/A
N/A
CFO?
CFO=abcdefghijxxxxxx
(see Description of Arguments)
MN-SLM-5650C
Advertisement
Table of Contents
