Comtech EF Data SLM-5650C CyberLynx Installation And Operation Manual page 108

Command Arguments for
Parameter (Instruction Command or
Type Code and Response to
Qualifier) Query
Tx Clock TCI= 1 byte
Invert
Tx TCW= 1 byte
Reed-
Solomon
Code Word
Tx TDE= 1 byte
Differential
Encoding
Tx Data TDF= 1 byte
Fault
Tx Data TDI= 1 byte
Invert
Tx TFQ= 8 bytes
Frequency
Serial Remote Control
Description of Arguments
Command or Query.
Invert Transmit Clock, where:
0=Normal
1=Inverted
Example: TCI=1 (selects Inverted TX Clock)
Command or Query.
Tx RS encoding, where:
0 = RS(225,205,10)
1 = RS(219,201,9)
2 = RS(208,192,8)
3 = RS(194,178,8)
4 = RS(126,112,7)
5 = RS(220,200,10)
Depending on Modem mode, overhead type, and data rate, not all selections will be valid.
Example: TCW=0 (This is a 'don't care' if RS is Off under TRS)
Command or Query.
Tx Differential Encoding, where:
x=Tx Differential Encoding:
0=Off
1=On
Depending on FEC type or Modulation Type, not all selections will be valid.
Example: TDE=1 (selects Tx Differential Encoding On)
Command or Query.
Transmit Data Fault, where:
0=None
1=DATA
2=AIS
Example: TDF=0 (selects Data Fault = None)
Command or Query.
Invert Transmit Data, where:
0=Normal
1=Inverted
Example: TDI=1 (selects Inverted TX Data)
Command or Query.
Tx Frequency, 52 to 88 MHz, 104 to 176 MHz, and 950 to 2000 MHz
Resolution = 1000Hz.
Example: TFQ=0140.987
SLM-5650C / SLM-5650C-ODU Satellite Modem
7–14
Revision 1
Query
Response to (Instruction Response to
Command Code and Query
Qualifier)
TCI = TCI? TCI=x
TCI? (see Description of
TCI* Arguments)
TCI#
TCW= TCW? TCW=x
TCW? (see Description of
TCW* Arguments)
TCW#
TDE= TDE? TDE=x
TDE? (see Description of
TDE* Arguments)
TDE#
TDF = TDF? TDF=x
TDF? (see Description of
TDF* Arguments)
TDF#
TDI = TDI? TDI=x
TDI? (see Description of
TDI* Arguments)
TDI#
TFQ= TFQ? TFQ=xxxx.xxx
TFQ? (see Description of
TFQ* Arguments)
TFQ#
MN-SLM-5650C