Chrysler Sebring 2004 Service Manual page 2314

P0441-EVAP PURGE SYSTEM PERFORMANCE —
TEST
3 Turn the ignition off.
Carefully inspect the Evap Purge Solenoid vacuum supply hose for proper routing.
Check for a pinched or plugged hose from the throttle body to the Purge Solenoid.
Inspect the vacuum port at the throttle body for any damage or plugging.
Were any problems found?
Yes → Repair the vacuum supply hose/tube as necessary.
→ Refer to the INTERMITTENT CONDITION symptom in the
No
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Driveability category.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
DRIVEABILITY - NGC
Continued
385
APPLICABILITY
All