Setting The Unlock Password; To Log In; To Change The Password - Mitsubishi Electric AT-50B Instruction Book

Setting the unlock password

1
Use the same password as the login password
to unlock buttons.

To log in

1
3

To change the password

5
6
7
2
3
Save button
Saves the settings.
1. Enter the login password from the 1 keyboard on the touch
panel. Touch 2
2. Touch the 3 Login button.
If the password matches, the Lock Buttons screen will be
4
displayed.
2
・The initial login password is "0000". Change the password if
necessary.
・If you forget the password, refer to the Installation Manual.
1. Enter the current password on the login screen, and then
touch 4
2. Enter the new password in the 5 [New Password] field.
* Password should be between four and eight characters.
8
3. Touch the 6 [Retype Password] field, and enter the new
password again.
4. Touch the 7 OK button to reflect the change and return to
the previous screen.
1. Touch the 1 Lock Buttons button on the [Restriction
Settings] screen.
2. Enter the password on the [Login Page] screen, and
touch the Login button. Refer to below for the details
on log in. If the correct password is entered, the
[Lock Buttons] screen will appear.
3. Press 1 . The screen that looks like the figure at
left will appear.
4. To allow unlocking the buttons without entering the
password, touch 2 "No password" to activate the
button. To require a password to unlock the buttons,
touch 2 "Password" to activate the button.
5. Touch the 3 Save button.
to delete a character.
. The screen at left will appear.
Touch 8 to delete a character.
45