Buick LeSabre 1965 Service Manual page 343

SUPER TURBINE "400'
DISASSEMBLY & ASSEMBLY 5 - 1 2 9
Figure 5-636
3. Turn unit over and remove
backing plate to clutch housing
snap ring. See Figure 5-636.
4. Remove direct clutch backing
plate, (five) 5 composition and
(five) 5 steel clutch plates. See
Figure 5-637. Model BU uses (4)
composition and (4) steel plates.
5. Using clutch compressor tool
and/or J-2590, compress spring
retainer and remove snap ring.
See Figure 5-638.
6. Remove retainer and sixteen
(16) piston release springs. See
Figure 5-640.
7. Remove the direct clutch pis-
ton. See Figure 5-641.
8. Remove the outer seal from
the piston. See Figure 5-642.
Figure 5-638
Figure 5-642
Figure 5-640
9. Remove the inner seal from
the piston. See Figure 5-643.
10. Remove the center piston seal
from the direct clutch housing.
See Figure 5-643A.
Figure 5-643
b. Inspection
1. Inspect sprag assembly for
popped or loose sprags. See Fig-
ure 5-644.
Figure 5-637
Figure 5-641
Figure 5-643A