Buick LeSabre 1965 Service Manual page 248

5 - 3 4 SERVICE PROCEDURES
SUPER TURBINE " 3 0 0 '
5. Remove two (2) solenoid to
stator control valve body retain-
ing bolts with 7/16" wrench.
Remove stator control solenoid
gasket. See Figure 5-112.
8. Remove eleven (11) valve body
to case bolts only using a 1/2"
socket. Do not remove v a l v e
body. See Figure 5-115.
Figure 5-110
2. Remove detent solenoid wire
f r o m c o n n e c t o r . See Fig-
ure 5-108.
3. Remove solenoid switch from
case. Inspect switch " O " ring.
If nicked, torn or worn replace.
See Figure 5-110.
SPRING & DETENT
ASSEMBLY
Figure 5-113
6. Remove spring detent assem-
bly bolt with a 1/2" socket. Re-
move s p r i n g detent assembly
from v a l v e body. See Fig-
ure 5-113.
Figure 5-116
9. Remove manual control valve
link by rotating valve body in a
counterclockwise direction to re-
move link from Park lock and
range selector inner valve. See
Figure 5-116.
Figure 5-111
4. With a grease pencil mark sta-
tor control solenoid with an "S".
This " S " will identify stator con-
trol solenoid for reassembly. See
Figure 5-111.
Figure 5-114
7. Remove seven (7) bolts retain-
ing stator control valve body to
transmission case using a 1/2"
socket. Remove stator control
valve body. See Figure 5-114.
Figure 5-117
10. Remove manual control valve
and link from valve body assem-
bly. Remove valve body. See Fig-
ure 5-117.
VALVE BODY PLATE
Figure 5-112
Figure 5-115 Figure 5-118