Buick LeSabre 1965 Service Manual page 277

SUPER TURBINE " 3 0 0 '
SERVICE PROCEDURES 5 - 6 3
SPEEDOMETER DRIVEN
GEAR 51EEVI R6TAINE
Figure 5-333
Figure 5-336
3. Install manual control valve
Figure 5-340
6. Install stator control valve
to 5-10 ft. lb. torque. See Figure
a n d H n k i n t o v a l y e b o d a s s e m
. body and seven (7) bolts retaining
5-333.
5-29 INSTALLATION OF
VALVE BODY
Figure 5-334
1. With transmission in hori-
zontal position, install valve body
to plate gasket. See Figure 5-334.
Figure 5-335
2. Install valve body plate.
NOTE: V-6 valve body plate
have identification notch. See Fig-
ure 5-120.
bly. See Figure 5-336.
the stator control valve body.
Torque bolts to 8-12 ft. lbs.
See Figure 5-340.
STATOR CONTROL
VALVE BODY
Figure 5-337
4. Install manual control valve
link into park, lock and range
selector inner lever. See Fig-
ure 5-337.
Figure 5-341
7. Install stator control solenoid
and gasket to stator control valve
body. Torque bolts to 8-12 ft. lbs.
See Figure 5-341.
Figure 5-338
Figure 5-342
5. Install eleven (11) valve body 8. Before installing spring detent
to case retaining bolts. Torque assembly note routing of solenoid
bolts to 8-11 ft. lbs. See Fig- wires. Install spring detent as-
ure 5-338. sembly. T o r q u e bolt to 8-12