Buick LeSabre 1965 Service Manual page 336

5 - 1 2 2 DISASSEMBLY & ASSEMBLY
SUPER TURBINE " 4 0 0 '
PRESSURE REGULATOR SPRING
REGULATOR BOOST
VALVE AND BUSHING
Figure 5-584
Figure 5-585
4. Remove the regulator boost
valve bushing and valve.
5. Remove the pressure regulator
spring.
PUMP COVER
Figure 5-587
6. Remove the regulator valve,
spring retainer and spacer(s), if
present. See Figure 5-585.
7. Remove the pump cover to
body attaching bolts. See Figure
5-586.
8. Remove pump c o v e r from
body. See Figure 5-587.
9. Remove the retaining pin and
bore plug from the pressure
regulator bore. See Figure 5-588.
10. Remove the stator valve re-
taining pin. See Figure 5-590.
11. Remove s t a t o r valve and
spring. See Figure 5-591.
12. Remove the hook type oil
RETAINING
PIN
Figure 5-590
SPRING STATOR VALVE
Figure 5-591
13. Remove the pump to forwaru
clutch housing selective washer
(fiber).
rings from the pump cover. See NOTE: Do not remove the cooler
Figure 5-592. by-pass seat, unless replacement
f "•'' BORE PLUG PUMP COVER
Figure 5-586 Figure 5-588 Figure 5-592