Buick LeSabre 1965 Service Manual page 319

SWITCH STOP SCREW
IDLE STATOR SWITCH
THROTTLE ROD
CARBURETOR LEVER PIN
THROTTLE RETURN SPRING
ATTACHING SCREWS
*SCREW " A "
ADJUST IDLE STATOR SWITCH
AS FOLLOWS: ADJUST SWITCH
WITH THROTTLE AT CLOSED
POSITION mo RETURN SPRING
ATTACHED. WITH ATTACHING
SCREWS LOOSE, ROTATE SWITCH
(IN DIRECTION SHOWN) ABOUT
SCREW "A" UNTIL SWITCH STOP
SCREW BOTTOMS AGAINST CASE.
HOLD SWITCH IN THIS POSITION
AND TIGHTEN ATTACHING SCREWS.
WASHER
RETAINER
STATOR AND DETENT SWITCH
ADJUST STATOR AND DETENT SWITCH AS
FOLLOWS WITH CARBURETOR IN WIDE OPEN
POSITION AND SWITCH PLUNGER BOTTOMED,
ADJUST LINK UNTIL IT WILL SLIP OVER
CARBURETOR LEVER PIN, THEN SCREW LINK
INTO PLUNGER 1 1/2 TURNS. INSTALL
WASHER AND RETAINER.
TO
s
8
o
ft
§ «
l i
> V
a 09
ft
>
70
Figure 5-251—Detent Switch Adjustment
o