Buick LeSabre 1965 Service Manual page 203

SHIR LINKAGE ADJUSTMENTS
4A-3
Place screwdriver between the selector plate and the 2nd-3rd lever until selector plate
engages tang on both shift levers.
2ND-3RD LEVER
1ST-REVERSE LEVER
B; > 3 -SELECTOR PLATE
MAKE CERTAIN THESE DISTANCES
ARE EQUAL WHEN SCREWDRIVER
IS INSERTED
Figure 4A-4
5 1 Tighten shift rod adjusting clamps. Torque 17 to 23 ft. lbs. CAUTION: Do not over-torque.
1ST-REVERSE ADJUSTING
CLAMP BOLT
2ND-3RD ADJUSTING
CLAMP BOLT
Figure 4A-5