Buick LeSabre 1965 Service Manual page 327

SUPER TURBINE " 4 0 0 '
DISASSEMBLY & ASSEMBLY 5 - 1 1 3
Figure 5-537
Figure 5-540
Figure 5-538
4. Remove and discard pump to
case seal ring. See Figure 5-540.
5. Remove forward clutch and
turbine shaft assembly from
transmission. See Figure 5-541.
Figure 5-541
6. Remove forward clutch hub to
direct c l u t c h housing bronze
thrust washer, if it did not come
out with forward clutch housing
assembly.
Figure 5-543
7. Remove the direct clutch as-
sembly. See Figure 5-542.
8. Remove the front band
assembly.
9. Remove the sun gear shaft.
See Figure 5-543.
10. Check
follows:
r e a r end play as
a. I n s t a l l J-7004 with 3/16
adapter into an extension housing
attaching bolt hole.
b. Mount the dial indicator,
J-8001 on the rod and index with
the end of the output shaft. See
Figure 5-544.
c. Move the output shaft in and
out to read the end play. End
play should be from .003"-.019".
The selective washer controlling
this end play is the steel washer
Figure 5-539
Figure 5-542
Figure 5-544