Disassembly Of Gear Unit Assembly - Buick LeSabre 1965 Service Manual

SUPER TURBINE " 4 0 0 '
DISASSEMBLY & ASSEMBLY 5 - 1 1 5
Figure 5-553
5 - 1 4 DISASSEMBLY OF
GEAR UNIT
ASSEMBLY
1. Remove the case center sup-
port assembly. See Figure 5-554.
2. Remove the center support to
reaction carrier bronze thrust
washer. See Figure 5-555.
3. Remove the center support to
sun gear races and thrust bear-
ing. See Figure 5-556.
NOTE: One of the races may
have been removed with the cen-
ter support.
4. Remove the reaction carrier
and sprag assembly. See Figure
5-557.
5. Remove front internal gear
ring from output carrier assem-
bly. See Figure 5-558.
Figure 5-\555
Figure 5-556
6. Remove sun gear. See Figure
5-560.
7. Remove reaction carrier to
output carrier thrust washer. See
Figure 5-561.
Figure 5-558
Figure 5-560
8. Turn assembly over and place
mainshaft in hole in work bench.
9. Remove output shaft to rear
carrier snap ring. See Figure
5-562.
SPRAG ASSEMBLY i j l j h i
REAC^O^l^-—|
••-^.OUTPUT
jfflP CARRIER
Figure 5-554 Figure 5-557
Figure 5-561