Buick LeSabre 1965 Service Manual page 278

5 - 6 4 SERVICE PROCEDURES
SUPER TURBINE "300
1
ft. lbs. Center spring over detent 12. Install oil strainer pipe to
plate. See Figure 5-342. case seal.
Figure 5-343
9. Install solenoid switch into
case. See Figure 5-343.
OIL PAN ATTACHING
•/BOLTS M i l * ?
13. Install oil filter on V-8
models. See Figure 5-346.
14. Install oil strainer on V-6
models. See Figure 5-347.
15. Install oil pan gasket and pan.
See Figure 5-348.
Figure 5-344
10. Install detent solenoid wire
to connector. See Figure 5-344.
IL STRAINER
USED ON V-6
MODELS ONLY
Figure 5-350
16. Install fourteen (14) oil pan
attaching bolts. Torque bolts to
10-12 ft. lbs. See Figure 5-350.
5-30 INSTALLATION OF
GOVERNOR AND
VACUUM
MODULATOR
a. Installation of Governor
1. Slide governor into its bore
in case. Turn governor assembly
so teeth on governor gear engage
teeth on output shaft.^See Figure
5-351.
Figure 5-345
11. Install solenoid connector to
solenoid switch. See Figure
5-345.
Figure 5-348
Figure 5-351
2. Install governor gasket and
cover to case. Torque bolts to
8-12 ft. lbs. See Figure 5-352.