Buick LeSabre 1965 Service Manual page 325

SUPER TURBINE " 4 0 0 '
DISASSEMBLY & ASSEMBLY 5 - 1 1 1
Figure 5-527 Figure 5-525
9. Remove six (6) check balls
from cored passages in trans-
mission case. See Figure 5-524.
10. Remove front servo piston,
washer, pin, retainer and spring
from transmission. See Figure
5-525.
11. If it becomes necessary to
remove the internal manual link-
age proceed as follows:
a. Unthread the jam nut holding
detent lever to manual shaft. See
Figure 5-526.
Figure 5-528
CAUTION: Do not lose jam nut
as it becomes free from the shaft. c. Remove the detent lever from
the manual shaft.
b. Remove manual shaft retain-
ing pin from case. See Figure d. Remove the manual shaft and
5-527. jam nut from case.
PARKING BRAKE
ACTUATOR ASSEMBLY
Figure 5-530
NOTE: If necessary to replace,
pry the manual shaft seal out of
case.
e. Remove parking actuator rod
and detent lever assembly.
f. If necessary, remove the de-
tent lever retaining "E" ring and
detent lever. See Figure 5-528.
g. Remove attaching screws and
parking b r a c k e t . See Figure
5-529.
h. Remove parking pawl return
spring. See Figure 5-530.
i. Remove parking pawl shaft
retainer. See Figure 5-531.
j . Remove parking pawl shaft,
"O" ring seal and parking pawl.
See Figure 5-532.
Figure 5-526
Figure 5-529
Figure 5-531