4A-4
SHIFT LINKAGE ADJUSTMENTS
CHECK CROSS-OVER AS FOLLOWS:
0
l a . Find the neutral detent in the lst-reverse position and mark the mast jacket.
b. Move shift lever down to the 2nd-3rd position and find the neutral detent position.
Check to see if the two detents line up as shown by the mark made on the mast jacket.
c. If the two detents line up the cross-over is correctly adjusted. If they do not line up then
shorten the lst-reverse rod by pulling it through the swivel by no more than 3/16".
REV.
2ND
\
^
1ST
3RD
Figure 4A-6