Automatic Update From Remote Servers - AudioCodes E-SBC User Manual

CHAPTER 47 Automatic Provisioning
◆
c. Automatic Update of Call Progress Tone file:
◆
◆
d. Automatic Update of ini configuration file:
◆
◆
e. Enable Cyclical Redundancy Check (CRC) on downloaded ini file:
◆
◆
4. Power down and then power up the device.

Automatic Update from Remote Servers

This example describes how to configure the Automatic Update feature where files are stored and
downloaded from different file server types. The example scenario includes the following:
■ NFS server (Version 2) at 10.13.2.10 for storing the CPT file.
■ FTPS server at ftpserver.corp.com for storing the License Key file. The login credentials to the
server are username "root" and password "wheel".
■ HTTP server at www.company.com for storing the configuration file.
AutoCmpFileUrl = 'https://www.company.com/sw.cmp'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'
ini File:
CptFileURL = 'https://www.company.com/call_progress.dat'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# call-progress-tones 'http://www.company.com/call_
progress.dat'
ini File:
IniFileURL = 'https://www.company.com/config.ini'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# voice-configuration
'http://www.company.com/config.ini'
ini File:
AUPDCheckIfIniChanged = 1
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# crc-check regular
Mediant 1000 Gateway & E-SBC | User's Manual
- 903 -