Supplementary Services Parameters; Caller Id Parameters - AudioCodes E-SBC User Manual

CHAPTER 68 Configuration Parameters Reference
[DigitPatternForwardOnNoAnswerExt]
'Forward on Do Not Disturb Digit
Pattern (External)'
configure voip > gateway
voice-mail-setting > fwd-
dnd-dig-ptrn-ext
[DigitPatternForwardOnDNDExt]
'Forward on No Reason Digit Pattern
(External)'
configure voip > gateway
voice-mail-setting > fwd-no-
rsn-dig-ptrn-ext
[DigitPatternForwardNoReasonExt]
'Internal Call Digit Pattern'
configure voip > gateway
voice-mail-setting > int-
call-dig-ptrn
[DigitPatternInternalCall]
'External Call Digit Pattern'
configure voip > gateway
voice-mail-setting > ext-
call-dig-ptrn
[DigitPatternExternalCall]
'Disconnect Call Digit Pattern'
configure voip > gateway
voice-mail-setting > disc-
call-dig-ptrn
[TelDisconnectCode]
'Digit To Ignore Digit Pattern'
configure voip > gateway
voice-mail-setting > dig-to-
ignore-dig-pattern
[DigitPatternDigitToIgnore]

Supplementary Services Parameters

This subsection describes the device's supplementary telephony services parameters.

Caller ID Parameters

The caller ID parameters are described in the table below.
Parameter
Mediant 1000 Gateway & E-SBC | User's Manual
Description
Defines the digit pattern used by the PBX to
indicate 'call forward on do not disturb' when the
original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
Defines the digit pattern used by the PBX to
indicate 'call forward with no reason' when the
original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
Defines the digit pattern used by the PBX to
indicate an internal call.
The valid range is a 120-character string.
Defines the digit pattern used by the PBX to
indicate an external call.
The valid range is a 120-character string.
Defines a digit pattern that when received from the
Tel side, indicates the device to disconnect the call.
The valid range is a 25-character string.
Defines a digit pattern that if received as Src (S) or
Redirect (R) numbers is ignored and not added to
that number.
The valid range is a 25-character string.
- 1236 -