AudioCodes E-SBC User Manual page 828

CHAPTER 34 Routing SBC
Index
Name
Type
SBC Advanced
Call Setup Rules Set ID
Tags
● IP Group for the proxy server ("Type" tag is later used to identify proxy server):
Index
Name
Type
SBC Advanced
Call Setup Rules Set ID
Tags
3. Open the Call Setup Rules table (see
following Call Setup rules:
● Uses the value of the "Type" tag name, configured in the IP Group's 'Tags' parameter, as
the source tag:
Index
Rule Set ID
Action
Action Subject
Action Type
Action Value
● If the source tag name "Type" equals "PBX" (i.e., SIP message from an IP Group
belonging to one of the IP PBXs), then use the value of the "Port" tag name, configured in
the 'Tags' parameter of the classified IP Group, as the local UDP port on the leg interfacing
with the proxy server for messages sent to the proxy server:
Index
General
3
PBX-3
Server
1
Type=PBX;Port=6003
General
Configuring Call Setup
General
1
1
srctags.Type
Modify
param.ipg.src.tags.Type
General
2
- 790 -
Mediant 1000 Gateway & E-SBC | User's Manual
4
ITSP
Server
1
Type=ITSP
Rules), and then configure the