CHAPTER 57 Reporting Information to External Party
Field
Remote
SSRC
Sender
[619]
Report Type
[303]
RTP IP
DiffServ
[624]
Session ID
[302]
Displays the remote (sender) RTP synchronization source (SSRC). The field is
an integer from 0 to 0XFFFFFFFF.
Note:
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■
The field is applicable only to SBC media and Gateway CDRs.
■
The default field title is "RemoteRTPssrc" for Gateway Syslog and
"RxRTPssrc" for SBC Syslog Media.
■
The maximum number of characters for Syslog tabular alignment is 14.
Displays the type of CDR report. The field is a string:
■
"CALL_START": The CDR is sent upon an INVITE message.
■
"CALL_CONNECT": The CDR is sent upon a 200 OK response.
■
"CALL_END": The CDR is sent upon a BYE message.
■
"DIALOG_START": The CDR is sent upon the start of a non-INVITE
session (only when enabled, using the EnableNonCallCdr parameter).
■
"DIALOG_END": The CDR is sent upon the end of a non-INVITE session
(only when enabled, using the EnableNonCallCdr parameter).
■
"DIALOG_CONNECT ": The CDR is sent upon establishment of a non-
INVITE session (only when enabled, using the EnableNonCallCdr
parameter).
■
"MEDIA_START": The CDR is sent upon 200 OK response or early media
■
"MEDIA_UPDATE": The CDR is sent upon a re-INVITE message
■
"MEDIA_END": The CDR sent is upon a BYE message
Note:
■
The field is included in the default CDR.
■
The field is applicable to all CDR Report Types.
■
The field is applicable to SBC media and signaling, and Gateway CDRs.
■
The default field title is "GWReportType" for Gateway Syslog and Local
Storage, "SBCReportType" for SBC Syslog and Local Storage, and
"MediaReportType" for SBC Syslog Media.
■
The maximum number of characters for Syslog tabular alignment is 15.
The field displays the RTP IP DiffServ. The valid value is an integer from 0 to
63.
Note:
■
The field is included in the default CDR.
■
The field is applicable to "CALL_END", "CALL_CONNECT", "MEDIA_
START", "MEDIA_UPDATE", "MEDIA_END" CDR Report Types.
■
The field is applicable only to SBC media and Gateway CDRs.
■
The default field title is "TxRTPIPDiffServ".
■
The maximum number of characters for Syslog tabular alignment is 15.
Displays the unique session ID. The field value is a string of up to 24
characters.
Note:
- 1002 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description