AudioCodes E-SBC User Manual page 1109

CHAPTER 65 Testing SIP Signaling Calls
[Test_Call_DestTransportType]
'QoE Profile'
qoe-profile
[Test_Call_QOEProfile]
'Bandwidth Profile'
bandwidth-profile
[Test_Call_BWProfile]
Media
'Offered Audio Coders Group'
offered-audio-coders-
group-name
[Test_Call_
OfferedCodersGroupName]
'Allowed Audio Coders Group'
allowed-audio-coders-
group-name
[Test_Call_
AllowedAudioCodersGroupName]
Parameter
Mediant 1000 Gateway & E-SBC | User's Manual
Description
■ [0] UDP
■ [1] TCP
■ [2] TLS
■ [3] SCTP
Note: The parameter is applicable only if you configure
the 'Route By' parameter to Dest Address.
Assigns a QoE Profile to the test call.
By default, no value is defined.
To configure QoE Profiles, see
Experience Profiles.
Assigns a Bandwidth Profile to the test call.
By default, no value is defined.
To configure Bandwidth Profiles, see
Bandwidth Profiles.
Assigns a Coder Group, configured in the Coder Groups
table, whose coders are added to the SDP Offer in the
outgoing Test Call.
If not configured, the device uses the Coder Group
specified by the 'Extension Coders Group' parameter of
the IP Profile associated with the rule's IP Group (see the
'IP Group' parameter above).
To configure Coder Groups, see
Groups.
Note:
■ The parameter's settings override the corresponding
SBC parameter of the IP Profile associated with the
rule's IP Group.
■ If you don't configure this parameter nor the
corresponding parameter of the associated IP Profile,
the device uses Coder Group ID 0.
Assigns an Allowed Audio Coders Group, configured in
the Allowed Audio Coders Groups table, which defines
only the coders that can be used for the test call. For
incoming test calls, the device accepts the first offered
coder that is supported and allowed.
If not configured, the device uses the Allowed Audio
Coders Group specified by the 'Allowed Audio Coders'
parameter of the IP Profile associated with the rule's IP
Group (see the 'IP Group' parameter above).
To configure Allowed Audio Coders Groups, see
Configuring Allowed Audio Coder
Note: The parameter's settings override the
corresponding SBC parameter of the IP Profile
associated with the rule's IP Group.
- 1071 -
Configuring Quality of
Configuring
Configuring Coder
Groups.