AudioCodes E-SBC User Manual page 814

CHAPTER 34 Routing SBC
Table 34-2: IP-to-IP Routing Table Parameter Descriptions
Parameter
'Routing Policy'
sbc-routing-
policy-name
[IP2IPRouting_
RoutingPolicyName]
General
'Index'
[IP2IPRouting_Index]
'Name'
route-name
[IP2IPRouting_
RouteName]
'Alternative Route
Options'
alt-route-
options
[IP2IPRouting_
AltRouteOptions]
Assigns a Routing Policy to the rule. The Routing Policy associates
the rule with an SRD(s). The Routing Policy also defines default
LCR settings as well as the LDAP servers used if the routing rule is
based on LDAP routing (and Call Setup Rules).
If only one Routing Policy is configured in the Routing Policies table,
the Routing Policy is automatically assigned. If multiple Routing
Policies are configured, no value is assigned.
To configure Routing Policies, see
Rules.
Note: The parameter is mandatory.
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters. By default, no
value is defined.
Determines whether this routing rule is the main routing rule or an
alternative routing rule (to the rule defined directly above it in the
table).
■ [0] Route Row = (Default) Main routing rule - the device first
attempts to route the call to this route if the incoming SIP
dialog's input characteristics matches this rule.
■ [1] Alternative Route Ignore Inputs = If the call cannot be
routed to the main route (Route Row), the call is routed to this
alternative route regardless of the incoming SIP dialog's input
characteristics.
■ [2] Alternative Route Consider Inputs = If the call cannot be
routed to the main route (Route Row), the call is routed to this
alternative route only if the incoming SIP dialog matches this
routing rule's input characteristics.
■ [3] Group Member Ignore Inputs = This routing rule is a
member of the Forking routing rule. The incoming call is also
forked to the destination of this routing rule. The matching input
characteristics of the routing rule are ignored.
■ [4] Group Member Consider Inputs = This routing rule is a
member of the Forking routing rule. The incoming call is also
forked to the destination of this routing rule only if the incoming
call matches this rule's input characteristics.
Note:
■ The alternative routing entry ([1] or [2]) must be defined in the
next consecutive table entry index to the Route Row entry (i.e.,
directly below it). For example, if Index 4 is configured as a
Route Row, Index 5 must be configured as the alternative route.
- 776 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description
Configuring SBC Routing Policy