AudioCodes E-SBC User Manual page 526

CHAPTER 20 SIP Definitions
Parameter
'Action Type'
action-type
[CallSetupRules_
ActionType]
'Action Value'
action-value
[CallSetupRules_
ActionValue]
■ header.from contains '1234' (SBC application only)
■ param.call.dst.user (called number)
■ param.call.src.user (calling number)
■ param.call.src.name (calling name)
■ param.call.redirect (redirect number)
■ param.call.src.host (source host)
■ param.call.dst.host (destination host)
■ srctags (source tag)
■ dsttags (destination tag)
■ header.content-type (for HTTP POST requests)
Defines the type of action to perform.
■ [-1] None = No action is performed. This option is typically used for
HTTP POST requests that are used for notifying the HTTP server
(e.g., when the 'Request Type' parameter is configured to HTTP
POST Notification). If you configure the parameter to this option
and it is the last rule in the table, the device processes the rule and
then exits the table. If it is not the last rule, the device processes
the rule and then checks the next rule.
■ [0] Add = (Default) Adds new message header, parameter or body
elements.
■ [1] Remove = Removes message header, parameter, or body
elements.
■ [2] Modify = Sets element to the new value (all element types).
■ [3] Add Prefix = Adds value at the beginning of the string (string
element only).
■ [4] Add Suffix = Adds value at the end of the string (string element
only).
■ [5] Remove Suffix = Removes value from the end of the string
(string element only).
■ [6] Remove Prefix = Removes value from the beginning of the
string (string element only).
■ [20] Run Rules Set = Performs a different Rule Set ID, specified in
the 'Action Value' parameter (see below)
■ [21] Exit = Stops the Rule Set ID and returns a result ("True" or
"False").
Defines a value that you want to use in the action.
The valid value is a string of up to 300 characters (case-insensitive).
You can use the built-in syntax editor to help you configure the field.
Click the Editor button located alongside the field to open the Editor,
and then simply follow the on-screen instructions.
Examples:
■ '+9723976'+ldap.attr.alternateNumber
■ '9764000'
■ ldap.attr.displayName
■ enum.result.url
- 488 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description