Viewing Syslog Messages - AudioCodes E-SBC User Manual

CHAPTER 58 Syslog and Debug Recording
●
●
●

Viewing Syslog Messages

You can view Syslog messages generated by the device using any of the following Syslog server
types:
■ Device's Web Interface: The device provides an embedded Syslog server, which is accessed
through the Web interface (Troubleshoot tab > Troubleshoot menu > Message Log ). You
can select the Syslog messages displayed on the page, and then copy-and-paste them into a
text editor such as Notepad. This text file (txt) can then be sent to AudioCodes support team
for diagnosis and troubleshooting.
The displayed logged messages are color-coded based on message type:
● "notice": Dark green
● "error", "crit", "alert", "emerg": Red
● "debug": Black
● "info": Blue
● "warn": Magenta
The page provides various buttons to do the following actions:
Button
Start
Stop
Clear
You can also view logged user activities in the Web interface (see
User Activity Logs).
Logging of CLI commands can only be configured through CLI or ini file.
You can configure the device to send an SNMP trap each time a user performs an
action. For more information, see
page 68.
Table 58-6: Buttons on Message Log Page
Resumes the message log after it has been stopped (see the Stop button).
Stops the message log, allowing you to easily scroll through the messages to a
specific message.
Clears the message log. The button can only be clicked after you have stopped
the message log (see the Stop button).
Note: If you navigate away from the Message Log page to another page, the
Message Log is stopped and cleared.
Mediant 1000 Gateway & E-SBC | User's Manual
Enabling SNMP Traps for Web Activity
Description
- 1050 -
Viewing Web
on