AudioCodes E-SBC User Manual page 969

CHAPTER 50 System Status
Field
Line Connected
Polarity state
Line polarity
Message Waiting
Indication
RTP/RTCP
Channel Identifier
RTP Direction
Local UDP Port
Remote IP Addr
Remote UDP Port
Rx Octet Count
Tx Octet Count
Network Jitter
Roundtrip Delay
Packet Loss
Remote RTCP
CName
Channel Identifier
Voice Settings
Coder
Line status:
■ "0": Disconnected
■ "1": Connected
Note: The parameter is applicable only to analog interfaces.
Port polarity:
■ "0": Normal
■ "1": Reversed
■ "2": N\A
Note: The parameter is applicable only to analog interfaces.
Line polarity:
■ "0": Positive
■ "1": Negative
Note: The parameter is applicable only to analog interfaces.
MWI status:
■ "0": Off
■ "1": On
Note: The parameter is applicable only to analog interfaces.
Channel identifier number.
Direction of RTP:
"Tx & Rx": both directions (transmit and receive)
Local UDP port on the device.
IP address of the remote IP side.
Port of the remote IP side.
Total number of received packets.
Total number of transmitted packets.
Network jitter (in msec).
Round-trip delay time (in msec).
Packet loss (in %).
RTP Control Protocol (RTCP) Canonical Name (CNAME) - persistent
transport-level identifier for an RTP endpoint.
Channel ID.
Displays the coder used for the call.
- 931 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description