AudioCodes E-SBC User Manual page 933

CHAPTER 47 Automatic Provisioning
AupdFilesList = 'ini', 'fk', 'cpt'
● CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-files-list ini,fk,cpt
2. Define the URL address of the provisioning server on which the files (specified in Step 1) are
located for download, using the TemplateUrl parameter. When you configure the URL, you
must include the file type placeholder, "<FILE>", which represents the file name. For each file
type specified in Step 1, the device sends an HTTP request to the server, where the
placeholder in the URL is replaced with the filename and extension, as listed in the below table.
For example, if you configure the AupdFilesList parameter as in Step 1 and the TemplateUrl
parameter to:
● ini File:
TemplateUrl = 'http://10.8.8.20/Site1_<FILE>'
● CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-url http://10.8.8.20/Site1_<FILE>
The device sends HTTP requests to the following URLs:
● http://10.8.8.20/Site1_device.ini
● http://10.8.8.20/Site1_fk.ini
● http://10.8.8.20/Site1_cpt.data
3. Place the files to download on the provisioning server. Make sure that their file names and
extensions are based on the hardcoded string values specific to the file type for the <FILE>
placeholder (e.g., "Site1_device.ini" for the ini file), as shown in the table below.
Table 47-1: File Template Keywords and Placeholder Values per File Type
File Type
ini file
CLI Script file
CLI Startup Script file
CMP file based on timestamp
Voice Prompts (VP) file
User Information file
CMP file
License Key file
Mediant 1000 Gateway & E-SBC | User's Manual
Keywords for
Template File
ini
cli
clis
acmp
vp
usrinf
cmp
fk
- 895 -
Value Replacing
<FILE> Placeholder
device.ini
cliScript.txt
cliStartupScript.txt
autoFirmware.cmp
vp.dat
userInfo.txt
firmware.cmp
fk.ini