CHAPTER 58 Syslog and Debug Recording
ITU Perceived Severity
(SNMP Alarm's Severity)
Critical
Major
Minor
Warning
Indeterminate
Cleared
■
Cleared Alarms: CLEAR-ALARM: <Alarm Name>; Textual Description: <Textual
Description>; Severity <Alarm Severity>; Source <Alarm Source>; Unique ID: <Alarm Unique
ID >; If exists Additional Info1:/ Additional Info2:/ Additional Info3:
Enabling Syslog
To use Syslog, you first need to enable it.
➢
To enable Syslog:
1.
Open the Logging Settings page (Troubleshoot menu > Troubleshoot tab > Logging folder >
Logging Settings).
2.
From the 'Enable Syslog' drop-down list, select Enable.
3.
Click Apply.
Configuring the Syslog Server Address
The device sends the Syslog messages to the Syslog server's address.
➢
To configure the Syslog server address:
1.
Open the Logging Settings page (Troubleshoot menu > Troubleshoot tab > Logging folder >
Logging Settings).
2.
In the 'Syslog Server IP' field [SyslogServerIP], enter the IP address of the Syslog server.
3.
In the 'Syslog Server Port' field, enter the port of the Syslog server.
4.
Click Apply.
Table 58-5: Syslog Message Severity
RecoverableMsg
RecoverableMsg
RecoverableMsg
Notice
Notice
Notice
- 1046 -
Mediant 1000 Gateway & E-SBC | User's Manual
AudioCodes Syslog Severity