AudioCodes E-SBC User Manual page 1021

CHAPTER 57 Reporting Information to External Party
Field
Call End
Sequence
Number
[442]
Call ID
[301]
Call Orig
RADIUS
[434]
Call Orig
[401]
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "Duration" for Syslog and Local Storage, and none
for RADIUS (ACCT_SESSION_TIME standard ID 46).
■ The maximum number of characters for Syslog tabular alignment is 8.
Displays the sequence number of the call. The field is an integer. For each call-
end CDR, the field is assigned the next consecutive number. For example, for
the first terminated call processed by the device, the field is assigned the value
"1"; for the second terminated call, the field is assigned the value "2", and so
on. The field value resets to 1 upon a device reset, an HA switchover (for HA-
supporting products), or when it reaches the value FFFFFFFF (hexadecimal).
As the field is consecutive, you can use this field to check whether there are
any missing CDRs.
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format and Gateway CDR Format tables.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Displays the unique ID of the call, which appears in the SIP Call-ID header.
The field is a string of up to 130 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable to SBC media and signaling, and Gateway CDRs.
■ The default field title is "SIPCallId" for Syslog and Local Storage, and "call-
id=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 50.
Displays the originator of the call:
■ "answer": Call originated from the IP side (Gateway) or incoming leg (SBC)
■ "originate": Call originated from the Tel side (Gateway) or outgoing leg
(SBC)
Note:
■ The field is included in the default CDR.
■ The field is applicable to CDR Report Types "Start Acc" and "Stop Acc".
■ The field is applicable to all types, but mainly to RADIUS (SBC and
Gateway CDRs).
■ The default field title is "h323-call-origin=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 10.
Displays which side originated the call for the specific leg.
■ "LCL": SBC Outgoing leg (called party side) or Tel side
■ "RMT": SBC Incoming leg (i.e., caller party side) or IP side
Note:
■ The field is included in the default CDR.
- 983 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description