AudioCodes E-SBC User Manual page 1307

CHAPTER 68 Configuration Parameters Reference
[TDMHairPinning]
[TDMHairPinningAlarmIndication]
'Enable TDM Tunneling'
tdm-tunneling
[EnableTDMoverIP]
[EnableTDMOverIPforTrunk]
iso8859-charset
[ISO8859CharacterSet]
Parameter
Mediant 1000 Gateway & E-SBC | User's Manual
Description
Defines static TDM hair-pinning (cross-connection)
performed at initialization. The connection is between
trunks with an option to exclude a single B-channel in
each trunk. Format example: T0-T1/B3,T2-T3,T4-T5/B2.
Note:
■ For the parameter to take effect, a device reset is
required.
■ The parameter is applicable only to PRI.
Enables two trunks that are connected through TDM
hairpinning to signal the Far-End about the presence of
PSTN alarms. When the trunk with TDM hairpinning
receives a PSTN alarm, its' connected trunk sends an
AIS alarm to its' Far-End.
■ [0] = (Default) Disable
■ [1] = Enable
Note:
■ For the parameter to take effect, a device reset is
required.
■ The parameter is applicable only to PRI.
Enables TDM tunneling for all calls.
■ [0] Disable (default)
■ [1] Enable = Enables TDM tunneling. For more
information, see TDM
■ [2] Private Wire = Enables TDM tunneling for private
wire services. For more information, see
Private Wire Interworking.
Note:
■ For the parameter to take effect, a device reset is
required.
■ The parameter is applicable only to ISDN PRI.
■ To enable the parameter per trunk, see the
EnableTDMOverIPforTrunk parameter.
Enables TDM tunneling for a specific trunk. For a
description of the parameter, see EnableTDMoverIP.
Defines the ISO 8859 character set type (languages) for
representing the alphanumeric string of the calling name
(caller ID) in the forwarded message, for IP-to-Tel and
Tel-to-IP calls.
■ [0] = No Accented - proprietary method where
incoming INVITE messages with any accented
characters (e.g., á, é, í, ó, and ü), which are
represented in a 2-byte unicode character, are
translated to Latin-only, which are normal one-byte
ASCII characters (a, e, i, o, and u, respectively).
■ [1] = Western European (Default)
- 1269 -
Tunneling.
Configuring