Automatic Update From Remote Servers - AudioCodes Mediant 800B User Manual

User's Manual

42.2.9.2 Automatic Update from Remote Servers

This example describes how to configure the Automatic Update feature where files are
stored and downloaded from different file server types. The example scenario includes the
following:

FTPS server at ftpserver.corp.com for storing the Voice Prompts (VP) file. The login
credentials to the server are username "root" and password "wheel".

HTTP server at www.company.com for storing the ini configuration file.

DNS server at 80.179.52.100 for resolving the domain names of the provisioning
servers (FTPS and HTTP).

To set up Automatic Provisioning for files stored on different server types
(example):
5. VP file:
a. Set up an FTPS server and copy the VP file to the server.
b. Configure the device with the URL path of the VP file:
VPFileUrl = 'ftps://root:wheel@ftpserver.corp.com/vp.dat'
6. Software (.cmp) and ini files:
a. Set up an HTTP Web server and copy the .cmp and ini files to the server.
b. Configure the device with the URL paths of the .cmp and ini files:
AutoCmpFileUrl =
IniFileURL = 'http://www.company.com/device/inifile.ini'
7. Configure the device with the IP address of the DNS server for resolving the domain
names of the FTPS and HTTP servers:
[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
InterfaceTable 0 = 6, 10, 10.15.7.95, 16, 10.15.0.1, 1,
"Voice", 80.179.52.100, 0.0.0.0, "vlan 1";
[ \InterfaceTable ]
Version 6.8
'http://www.company.com/device/sw.cmp'
683
42. Automatic Update Mechanism
Mediant 800B Gateway and E-SBC