AudioCodes E-SBC User Manual page 1147

CHAPTER 68 Configuration Parameters Reference
Parameter
auto-firmware
[AutoCmpFileUrl]
aupd-verify-cert
[AUPDVerifyCertificates]
credentials
[AUPDUserPassword]
crc-check regular
[AUPDCheckIfIniChanged]
Mediant 1000 Gateway & E-SBC | User's Manual
Defines the filename and path (URL) to the provisioning server
from where the software file (.cmp) can be downloaded, based
on timestamp for the Automatic Updated mechanism.
The valid value is an IP address in dotted-decimal notation or
an FQDN.
Determines whether the Automatic Update mechanism
verifies the TLS certificate received from the provisioning
server when the connection is HTTPS.
■ [0] = Disable (default)
■ [1] = Enables TLS certificate verification when the
connection with the provisioning server is based on
HTTPS. The device verifies the authentication of the
certificate received from the provisioning server. The
device authenticates the certificate against its trusted root
certificate store (see
and if ok, allows communication with the provisioning
server. If authentication fails, the device denies
communication (i.e., handshake fails).
Defines the username and password for digest (MD5
cryptographic hashing) and basic access authentication with
the HTTP server on which the files to download are located for
the Automatic Update feature.
The valid value is a string of up to 128 characters. The syntax
is 'username:password' (e.g., 'joe:1234'). By default, no value
is defined.
Note: The device only uses the username and password
configured by this parameter if no username and password
has been configured for the parameter used to configure the
URL of the server with the name of the file, for example,
[CmpFileURL].
Enables the device to perform cyclic redundancy checks
(CRC) on downloaded configuration files during the Automatic
Update process. The CRC checks whether the content (raw
data) of the downloaded file is different to the content of the
previously downloaded file from the previous Automatic
Update process. The device compares the CRC check value
(code) result with the check value of the previously
downloaded file. If the check values are identical, it indicates
that the file has no new configuration settings, and the device
discards the file. If the check values are different, the device
installs the downloaded file and applies the new configuration
settings.
■ [0] = (Default) Disable - the device does not perform CRC
and installs the downloaded file regardless.
- 1109 -
Description
Configuring SSL/TLS Certificates)