AudioCodes E-SBC User Manual page 1007

CHAPTER 57 Reporting Information to External Party
Metric
SessionDesc
JitterBuffer
PacketLoss
BurstGapLoss
Parameter
PT Payload Type - 'payload type' parameter in the RTP
packets (i.e., the codec).
PD Payload Description - description of the codec
SR Sample Rate - rate at which the voice was sampled
FD Frame Duration (msec) - packetization rate
FO Frame Octets - number of octets in each frame per
RTP packet
FPP Frames per Packets - number of frames per RTP
packet
PLC Packet Loss Concealment - indicates whether a PLC
algorithm was used for the session ("0" - unspecified;
"1" - disabled; "2" - enhanced; "3" - standard)
SSUP Silence Suppression State - indicates whether silence
suppression, also known as Voice Activity Detection
(VAD) is enabled ("on" or "off")
JBA Jitter Buffer Adaptive - indicates the jitter buffer in the
endpoint ("0" - unknown; "1" - reserved; "2" - non-
adaptive; "3" - adaptive)
JBR Jitter Buffer Rate
JBN Jitter Buffer Nominal
JBM Jitter Buffer Max
JBX Jitter Buffer Abs Max
NLR Network Packet Loss Rate
JDR Jitter Buffer Discard Rate
BLD Burst Loss Density
BD Burst Duration
GLD Gap Loss Density
GD Gap Duration
GMIN Minimum Gap Threshold
- 969 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description