AudioCodes E-SBC User Manual page 1400

CHAPTER 68 Configuration Parameters Reference
'AMD Sensitivity File'
[AMDSensitivityFileName]
[AMDSensitivityFileUrl]
[AMDMinimumVoiceLength]
[AMDMaxGreetingTime]
[AMDMaxPostGreetingSilenceTime]
[AMDTimeout]
Parameter
Mediant 1000 Gateway & E-SBC | User's Manual
Description
Note: If this feature is configured for a specific IP
Profile, the settings of this global parameter is ignored
for calls associated with the IP Profile.
Defines the name of the AMD Sensitivity file that
contains the AMD Parameter Suites.
Note:
■ This file must be in binary format (.dat). You can
use the DConvert utility to convert the original file
format from XML to .dat.
■ You can load this file using the Web interface (see
Loading Auxiliary Files).
Defines the URL path to the AMD Sensitivity file for
downloading from a remote server for the Automatic
Update mechanism.
Defines the AMD minimum voice activity detection
duration (in 5-ms units). Voice activity duration below
this threshold is ignored and considered as non-voice.
The valid value range is 10 to 100. The default is 42
(i.e., 210 ms).
Global parameter that defines the maximum duration
that the device can take to detect a greeting message.
You can also configure this feature per specific calls,
using IP Profiles (IpProfile_AMDMaxGreetingTime).
For a detailed description of the parameter and for
configuring this feature in the IP Profiles table, see
Configuring IP Profiles.
Note: If this feature is configured for a specific IP
Profile, the settings of this global parameter is ignored
for calls associated with the IP Profile.
Global parameter that defines the maximum duration of
silence from after the greeting time is over, configured
by [AMDMaxGreetingTime], until the device's AMD
decision. You can also configure this feature per
specific calls, using IP Profiles (IpProfile_
AMDMaxPostSilenceGreetingTime). For a detailed
description of the parameter and for configuring this
feature in the IP Profiles table, see
Profiles.
Note: If this feature is configured for a specific IP
Profile, the settings of this global parameter is ignored
for calls associated with the IP Profile.
Defines the timeout (in msec) between receiving
Connect messages from the Tel side and sending
AMD results.
The valid range is 1 to 30,000. The default is 2,000
(i.e., 2 seconds).
- 1362 -
Configuring IP