Automatic Update From Remote Servers - AudioCodes Mediant 500L User Manual

# configure network
(config-network)# interface network-if 0
(network-if-0)# primary-dns 80.179.52.100
3. Configure the device with the following Automatic Update settings:
a. Automatic Update is done every 24 hours (1440 minutes):
♦
♦
b. Automatic Update of software file (.cmp):
♦
♦
c. Automatic Update of Call Progress Tone file:
♦
♦
d. Automatic Update of ini configuration file:
♦
♦
e. Enable Cyclical Redundancy Check (CRC) on downloaded ini file:
♦
♦
4. Power down and then power up the device.
48.2.10.2

Automatic Update from Remote Servers

This example describes how to configure the Automatic Update feature where files are
stored and downloaded from different file server types. The example scenario includes the
following:

FTPS server at ftpserver.corp.com for storing the License Key file. The login
credentials to the server are username "root" and password "wheel".
User's Manual
ini File:
AutoUpdateFrequency = 1440
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# update-frequency 1440
ini File:
AutoCmpFileUrl =
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'
ini File:
CptFileURL =
'https://www.company.com/call_progress.dat'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# call-progress-tones
'http://www.company.com/call_progress.dat'
ini File:
IniFileURL = 'https://www.company.com/config.ini'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# voice-configuration
'http://www.company.com/config.ini'
ini File:
AUPDCheckIfIniChanged = 1
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# crc-check regular
Mediant 500L Gateway & E-SBC
'https://www.company.com/sw.cmp'
844 Document #: LTRT-10532