Inlet Valve - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Inlet Valve

1. Switch the coffee maker "OFF".
2. Shut off the water supply.
3. Drain the water tank completely.
4. Remove the fitting from the inlet valve at the back of the machine.
5. Disconnect the two wires that go to the inlet valve.
6. Disconnect the inlet hose from the hot water tank.
a) Remove the clamp securing the hose to the inlet fitting at the bottom of the water tank.
b) Pull firmly on the hose to remove it.
7. Remove the screws that secure the old inlet valve to the back of the machine.
a) These screws are located on the outside of the rear wall of the machine.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Water Tank
Remove Clamp
5 – R E P L A C I N G
Disconnect Wires
Inlet
Valve
Water Tank
C O M P O N E N T S
Page 97 of 110