Table of Contents
Advertisement
Service Manual
Removing Inlet Valve
1.
2.
3.
To re-install the inlet, follow these same instructions in the reverse order.
52
With the rear panel removed, and the water source disconnected, remove the circle
clamp and the hose from the inlet valve.
Disconnect the wiring from the inlet valve. Be careful not to discard or misplace the
small blue jumper wire.
Push the valve towards the right and turn it slightly to remove it.
When installing a new inlet valve, always secure the hose to the valve with a
properly installed circle clamp.
VKI Publication #100309-001
Hide quick links:
Advertisement
Table of Contents
