Overflow Cup Assembly - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Overflow Cup Assembly

1. With machine power OFF, open the front door and inner door.
2. Disconnect the two inline wiring connections to the overflow cup.
3. Lift and remove the old overflow cup from its support.
4. Connect the two inline wiring connections to the new overflow cup.
5. Re-seat the overflow cup onto the overflow cup support.
6. Switch the machine power ON.
7. Pour a small quantity of water into the overflow cup (about half full) and make certain the
"Tank Overflow" error is displayed on the LCD.
8. Once verified, empty the overflow cup and place it back on its support.
9. Close the inner and out doors.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N 5 – R E P L A C I N G
Overflow Cup
Wiring Connections
C O M P O N E N T S
Page 102 of 110