Heater Element - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Heater Element

WARNING: To avoid severe burns, make absolutely certain that the heater
element is not hot before proceeding!
1. With machine power OFF, remove the water tank lid.
a) Refer to the
2. Remove the wires from the heater element terminals.
3. Detach the thermal cut-off switch from the heater element.
a) Remove the clamp securing the thermal cut-off switch to the element.
4. Remove the two 11/16" brass nuts securing the heater element to the lid.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
"Replacing the Water Tank
Remove Clamp
Remove
5 – R E P L A C I N G
Lid" instructions in this manual.
Thermal Cut-Off
Remove
C O M P O N E N T S
Page 66 of 110