Cup Holder Installation; Condiment Stand Installation - VKI Technologies CAFFÈ MIO Operation & Service Manual

C u p H o l d e r I n s t a l l a t i o n
1. Install two screws into the threaded
clinch nuts on the top right wall of the
coffee maker.
2. Place the cup holder onto the two
screws making certain the screws
enter the key-hole shaped slots of the
cup holder.
3. Slide the cup holder downwards onto
the two screws.
4. Tighten the two screws to secure the
cup holder in position.
C o n d i m e n t S t a n d I n s t a l l a t i o n
1. Install two screws into the threaded
clinch nuts on the top left wall of the
coffee maker.
2. Place the condiment stand onto the
two screws making certain the screws
enter the key-hole shaped slots of the
condiment stand.
3. Slide the condiment stand downwards
onto the two screws.
4. Tighten the two screws to secure the
condiment stand in position.
WARNING: DO NOT lift the coffee maker by placing your hand underneath
the cup holder or condiment stand. Remove both of these accessories prior
to lifting the equipment.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N 2 - I N S T A L L A T I O N
Page 12 of 110