R e p l a c i n g M a j o r C o m p o n e n t s
8. Install the brewer motor onto the brewer bracket.
a) Install the brewer motor to the brewer bracket using four screws – the stack of the brewer
motor should be towards the right side.
b) Tighten all four screws.
9. Re-connect the power wires to the brewer motor.
a) Wires #8 and #9.
10. Install the switch plate assembly onto the new brewer motor.
a) Secure the switch plate to the motor with three screws.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Brewer Bracket
Install
Install
Install
Brewer Motor
Install
5
–
R E P L A C I N G
Install
Brewer
Motor
Install
Install
Switch Plate
C O M P O N E N T S
Stack
Page 52 of 110