VKI Technologies CAFFÈ MIO Operation & Service Manual page 85

R e p l a c i n g M a j o r C o m p o n e n t s
d) Connect the phone-type cable to the connector on the bottom of the front circuit board and
connect the green ground wire to the ground tab on the inside wall of the door.
e) Pick up the drip tray detection and overflow bracket that was set aside earlier.
f) Connect the two small blue wires to the two overflow detection probes and connect the 3-
position connector to the drip tray detection switch.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Connect
Front Circuit
Board
Connect
Connect
Drip Tray
Detection
Switch
5 – R E P L A C I N G
Connect
Overflow
Detection
Probes
C O M P O N E N T S
Page 85 of 110